Viking Tactics® Cobra® Belt
Cobra® Buckles by AUSTRIALPIN
The Viking Tactics Cobra belt uses American Made 1 3/4 inch stiff nylon. For additional stiffness, we have also added stiffeners inside of the two layers of the VTAC Cobra belt to accommodate any holsters that are attached to the belt.
Your belt size is not the same as your pant or waist size; because your belt goes around you and your pants, your tucked in shirt, and your underwear, your belt size is usually 1 or 2 inches larger than you pant or waist size.
The Cobra Buckle on the Viking Tactics® Belt may not meet requirements for life support, all Unit regulations should be followed with regard to this belt and its emergency use.
Your belt size is not the same as your pant or waist size. Please forget everything you know about your pants size and take out a tape measure and measure around your waist so we are talking about the same sizing.
Usable lengths, there is about 4″ of play in each belt: M (34½ -37″), L (37½ – 41″), XL (41½ – 45″), XXL (45½ – 49½”)
BIG and TALL Cobra Belts: XXXL 49-53½; XXXXL 52 ½ – 56″
Need a larger size – click here
For those of you that are purchasing your VTAC® Cobra® belt to go with your VTAC Battle Belt, here are more measurements to consider: VTAC® Battle Belts are sized to go together with the VTAC® Cobra® Belt. If you purchase a large in one, then you should purchase a large in the other one as well. (Note measuring for VTAC Skirmish you should have an underbelt on for your tape measurement.) Please take the time to email if you are unclear, however the sizing above should be adequate to figure out your best fit.
WIDTH of Cobra® Belt: 1 3/4″
If you still have questions after reading all of this information thoroughly – twice, maybe three times – please do email! We want to do our best to get you into the correct size the first time! Lamb@VikingTactics.com
Nylon and assembly – In America
Cobra buckle is made by AustriAlpin
COBRA is a registered US trademark of AUSTRIALPIN
Works with: